Shearline champions Thixotropic moulding process

The thixotropic process is gaining ground for its ability to create strong yet light magnesium parts for a range of applications. Dave Wilson reports

Despite the fact it is a method widely used to manufacture housings for mobile phones and portable computers in the Far East, engineers in the UK would be forgiven for being unfamiliar with 'thixotropic moulding'.

However, as product designers become more aware of the versatility of the process to produce lightweight, strong, complex moulded magnesium parts, this could soon change. Many may soon be considering the use of magnesium alloy parts as a replacement for those made from engineering plastics and die-cast magnesium and aluminium alloys.
click here

According to Charles Maltby, technical and commercial director at Cambridgeshire-based Shearline, although the thixomoulding process combines elements of conventional die casting and plastic injection moulding, it is more closely akin to the latter.

Lighter train seats would reduce the amount of fuel required

In a typical thixotropic manufacturing process, chippings of a magnesium alloy are placed into a hopper at one end of a machine. The magnesium alloy is then heated to a point just below its melting point, at which point it goes into a semi-solid state where certain fractions within the alloy start to become liquid and act as a lubricant, while other parts of it remain in solid solution.

The semi-solid material is then fed into a barrel with a reciprocating screw, which moves forward, applying a shearing action to the thixotropic magnesium alloy, effectively injection-moulding it into a mould cavity where the component is to be manufactured. Once it has been moulded, it is removed from the tool, where any secondary operations can be performed on it, if needed.

However, the improved tolerance and thinner wall sections achievable via the process have the effect of reducing - indeed eliminating - many second operation machining processes, saving time and energy.

Maltby said the process has two major advantages: 'It does not demand as much energy and it does not produce the byproducts so typical of other processes. The result is that a thixotropic moulding machine can be used in any factory environment.'

What is more, because the magnesium alloy is forced into the mould under pressure, the resultant parts have a better density and lower porosity than those obtained from conventional die-casting processes.

Presently, the thixotropic process has been limited to high-volume production runs as tooling costs prohibit its use in low-volume manufacturing.

'It's hardly surprising then that most of the thixotropic manufacturing machines are based in Japan, China and Korea, where consumer products are made in large numbers,' said Maltby. 'In total, there are less than 500 machines in the world - and of those fewer than 10 are in Europe; around 20 in North America. None are in the UK.'

The machines that are currently producing parts are usually only capable of making relatively small components, and that's something that Maltby would like to see change.